| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER ON THE RIGHT SIDE TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
REMOVE THE 4 SCREWS HOLDING THE UPPER VAC HOUSING.
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE UPPER VAC HOUSING UP TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 8 |
|
LOOSEN THE 2 SCREWS HOLDING THE GUIDE HOUSING.
| Screwdriver-phillips |
|
|
| 9 |
|
PULL UP ON THE MIDDLE VAC HOUSING TO SEPARATE IT FROM THE LOWER VAC HOUSING.
|
| 10 |
|
LOCATE THE CURVE SUPPORT IN THE BOTTOM PART OF THE VAC HOUSING. VISUALLY INSECT IT FOR DAMAGE SUCH AS, CRACKING.
|